Menu Field - Fujitsu LifeBook C-6611 Bios Manual

L i f e B o o k C S e r i e s B I O S
Main
Supervisor Password Is:
User Password Is:
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
Password on Resume:
Boot from Removable Media:
Floppy Disk Access:
Hard Disk Security
Owner Information
Hard Disk Boot Sector:
F1 Help
ESC Exit
Table 14: Fields, Options and Defaults for the Security Menu

Menu Field

Options
Supervisor –—
Password is:
User Password is: –—
Set Supervisor –—
Password
Set User Password –—
Minimum User –—
Password Length:
24
PhoenixBIOS Setup Utility
Advanced Security
Select Item -/Space
Select Menu Enter
Figure 14. Security Menu
Default
Clear
Clear
[Enter]
[Enter]
[0]
Power Boot Info
Clear
Clear
Press [Enter] key to
set Supervisor Password
[Enter]
to enable any password
[Enter]
features.
[0]
Then password entry is
[Disabled]
required to enter BIOS
[Disabled]
Setup.
[All]
[All]
[Normal]
Change Values
Select Sub-Menu
Description
A display-only field. Set is displayed when the system supervisor
password is set and Clear when it is not.
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
Sets, changes or cancels the Supervisor Password. The Supervisor
Password may be up to seven characters long and must include
only letters or numbers (no symbols). Passwords are NOT case-
sensitive. To cancel a password press the Enter key instead of
entering characters in the Enter New Password field and in the
Re-enter New Password field. When a Supervisor Password is set
it must be used to access the BIOS setup utility.
This field can only be accessed if the Supervisor Password is set.
This field sets, changes or cancels the User Password. The User
Password may be up to seven characters long and must include
only letters or numbers (no symbols). Passwords are NOT case-
sensitive. To cancel a password press the Enter key instead of
entering characters in the Enter New Password field and in the Re-
enter New Password field. When a User Password is set it must be
used to access the BIOS setup utility.
Exit
Item Specific Help
F9 Setup Defaults
F10 Save and Exit