Page 9
This chapter contains information on how to configure, install and connect your modem card for Internet surfing. Static electricity can cause permanent damage to your card. You have to ground yourself during the installation by touching any non-painted sur- face of the computer's chassis every minute or so. It is important that you carry out the following steps to configure your modem card BEFORE proceeding to install it.
Page 10
3 — Setting Up Your Modem Some systems may have additional onboard audio chips. 'AC’97 Audio' and 'Onboard Audio' are two different options in the BIOS Setup. When system is using Onboard Audio, AC'97 Audio is disabled.
Page 11
3 — Setting Up Your Modem Power off your computer and any connected devices before installing your modem! Cover Plate AMR-Bus Slot Mounting Screw...
Page 27
4 — Installing Your Modem Driver You may be prompted with Digital Signature Not Found dialog box. (This happens when Windows detected a newer version of the modem driver.) Click to proceed.
Page 29
® 95, 98, 98 Second Edition, Me, NT ® 4.0 and Windows ® 2000. The testing procedures for MR2800-W Modem in Windows ® 95, 98, 98 Second Edition and Windows ® Me are similar. The following screen shots are based on Windows ®...
Need help?
Do you have a question about the MR2800-W and is the answer not in the manual?
Questions and answers