Table of Contents
Advertisement
Switching the display on/off
When the ignition key is turned to the ACC or ON positions, the opening screen will automatically appear.
1
After the opening screen is displayed,
important information will be displayed.
Make sure that it is read carefully.
(If you have the CVA-1003/CVA-1004/CVA-
1005/CVA-1006/IVA-C800/IVA-C801/IVA-
D900 system control monitor, the opening
screen may not be displayed.)
2
After you have read this important
information, press the ENTER button.
The map screen is displayed.
3
From any screen or menu, you may switch
the external monitor or CVA-1003/CVA-
1004/CVA-1005/CVA-1006/IVA-C800/IVA-
C801/IVA-D900 type unit's NAV source off
by pressing the DISP ON/OFF button on
the remote.
When you press the DISP ON/OFF button
again, the display turns back on.
a If the DVD-ROM is not inserted in the navigation system, "Please insert DVD-ROM." is
displayed. For details on how to load the DVD-ROM, see "Inserting the DVD-ROM" and
"Removing the DVD-ROM" in the navigation system's Hardware Manual.
a If the DVD-ROM cannot be read or is inserted incorrectly, "Error reading DVD-ROM." will be
displayed on the screen. Try reloading the DVD-ROM correctly. If the message does not
disappear, contact your local Alpine navigation dealer.
a If the navigation system display is kept on with the engine off for an extended period of time,
the vehicle's battery may discharge. Make sure the system automatically turns off when
remove your key from the ignition switch.
ENTER
/
ON/OFF
13
Advertisement
Table of Contents
