Cadillac 2013 Caddilac CTS Owner's Manual page 285

To increase vehicle speed in
small amounts, press the +RES
button. Each time this is done,
the vehicle goes about 1.6 km/h
(1 mph) faster.
Reducing Speed While Using
Cruise Control
If the cruise control system is
already activated:
Press and hold the SET button
on the steering wheel until the
desired speed is reached, then
release it.
To slow down in small amounts,
press the SET button on the
steering wheel briefly. Each time
this is done, the vehicle goes
about 1.6 km/h (1 mph) slower.
Passing Another Vehicle While
Using Cruise Control
Use the accelerator pedal to
increase the vehicle's speed. When
you take your foot off the pedal, the
vehicle will slow down to the
previous set cruise speed.
Using Cruise Control on Hills
How well the cruise control works
on hills depends upon the vehicle
speed, load, and the steepness of
the hills. When going up steep hills,
you might have to step on the
accelerator pedal to maintain the
vehicle speed. When going
downhill, the vehicle may
automatically shift to a lower gear to
keep the vehicle's speed down. The
vehicle may then shift to a higher
gear when braking assistance is no
longer required. When the brakes
are applied manually the cruise
control is disengaged.
Driving and Operating
Ending Cruise Control
There are four ways to end cruise
control:
Step lightly on the brake pedal
(manual and automatic
transmissions).
Press the clutch pedal to the
floor (manual transmissions).
Press on the steering wheel.
To turn off the cruise control,
press on the steering wheel.
Erasing Speed Memory
The cruise control set speed
is erased from memory by
pressing or if the ignition is
turned off.
9-41