Summary of Contents for Audio Note DAC2.1x Signature
Page 1
DAC2.1x Signature Owner’s Information The DAC2.1x Signature is a Level 2 digital to analogue converter, developed for the best possible sonic performance rather than technical specifications. To this end, the DAC incorporates thermionic valve technology to produce the most accurate sound possible and has...
Page 2
D/A converters and presents the digital signal directly to the converter after reformatting. In other words, all products in the Audio Note DAC range have no oversampling, no jitter reduction, no noise shaping and no re-clocking. Having...
Page 3
First, use a short piece of hook-up wire to electrically connect the ground post on the DAC2.1x Signature to the ground post on the pre-amplifier, if this does not stop the hum try connecting the wire to the CD-transport if it has a ground post. If not, then put the bare wire to one of the chassis screws on the transport, if the hum persists, contact your dealer for advice.
Page 4
Once all the connections are complete, turn on the digital source. Next turn on the DAC2.1x Signature by using the rocker switch located on the back panel above mains inlet socket. The red led on the front panel confirms that the unit is on.
Page 5
Warranty and Servicing Audio Note warrants that this product will be free from defects in materials and workmanship for one year from the original date of purchase from an appointed Audio Note dealer. The vacuum tubes are warranted for three months.
If you require technical support or have any questions, please direct them to your local Audio Note dealer or alternatively contact us directly at: Customer Support Audio Note (UK) Limited 25 Montefiore Road HOVE East Sussex BN3 1RD United Kingdom...
Need help?
Do you have a question about the DAC2.1x Signature and is the answer not in the manual?
Questions and answers