Operator Panel Appearance
FIGURE 1-10
Operator Panel
FIGURE 1-10
POWER (LED)
STANDBY (LED)
O
(
)
Operator Panel LEDs
TABLE 1-4
Operator Panel LEDs
TABLE 1-4
LEDs
Name
POWER
STANDBY
CHECK
1-18
SPARC Enterprise M8000/M9000 Servers Overview Guide • August 2009
shows the operator panel.
CHECK (LED)
lists the operating states indicated by the LEDs on the operator panel.
Light color
Description of function and operating state
Green
Indicates whether the main unit power is on.
If this LED is on, the power is on.
If this LED is blinking, the power-off sequence is in
progress.
Green
Indicates the standby state of the main unit.
If this LED is on, the power can be turned on.
Amber
Indicates the main unit operating status. (This is used to
indicate a maintenance target, or it indicates that the unit
cannot be started.)
If this LED is on, a system error has been detected.
MODE switch
POWER switch
Locked
Service