LG 60LN5400 Owner's Manual
Owners manual
Hide thumbs
Also See for 60LN5400:
- Owner's manual (49 pages) ,
- Specfications (2 pages) ,
- Owner's manual (36 pages)
Related Manuals for LG 60LN5400
Summary of Contents for LG 60LN5400
- Page 1 OWNER’S MANUAL LED TV * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 60LN5400 www.lg.com P/NO : MFL67651102 (1304-REV00)
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warnings. Follow all instructions. RISK OF ELECTRIC SHOCK DO NOT OPEN Do not use this apparatus near water. - Page 3 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on CAUTION concerning the Power Cord or pinched particularly at plugs, convenience (Can differ by country): receptacles, and the point where they exit from the It is recommended that appliances be placed upon a apparatus.
- Page 4 If you smell smoke or other odors coming from Do not attempt to modify this product in any way the TV, unplug the power cord and contact an without written authorization from LG Electronics. authorized service center. Unauthorized modification could void the user’s Keep the product away from direct sunlight.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS Dot Defect For USA and Canada The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots FCC NOTICE on the screen while you’re viewing the TV.
-
Page 6: Licenses
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is... -
Page 7: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS REMOTE CONTROL LICENSES WATCHING TV Turning the TV on for the first time OPEN SOURCE SOFTWARE NOTICE USING THE USER GUIdE TABLE OF CONTENTS SPECIFICATIONS INSTALLATION PROCEdURE MAINTENANCE Cleaning Your TV ASSEMBLING ANd PREPARING - Screen, frame, cabinet and stand Unpacking... -
Page 8: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING INSTALLATION PROCEdURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. ASSEMBLING ANd PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. - Page 9 ASSEMBLING AND PREPARING Remote Control, Batteries (AAA) Owner’s Manual Power Cord (See p. 26) Stand Body, Stand Base Stand Screws Stand Screws (See p. 13) 3 EA, P5 x 25 4 EA, M4 x 14 (See p. 13) (See p. 13) Desk-mount Screw Cable Holder Ferrite Core...
-
Page 10: Optional Extras
Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices only work with certain models. The model name or design may be changed manufacturer’s circumstances or policies. LG Audio device... -
Page 11: Parts And Buttons
ASSEMBLING AND PREPARING Parts and Buttons Screen Speakers Buttons Power Indicator Remote Control Sensor Intelligent Sensor Button Description Scrolls through the saved channels. Adjusts the volume level. Selects the highlighted menu option or confirms an input. Accesses the main menus, or saves your input and exits the menus. (SETTINGS) Changes the input source. -
Page 12: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV Use at least two people to move a large TV. When transporting the TV by hand, hold the TV as shown in the following illustration. When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. -
Page 13: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center or other furniture. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. CAUTION When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. -
Page 14: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a table Attach the TV to a table to prevent from tilting forward, Lift and tilt the TV into its upright position on a table. damage, and potential injury. - Leave a 10 cm (4 inches) (minimum) space from Mount the TV on a table, and then insert and tighten the the wall for proper ventilation. - Page 15 ASSEMBLING AND PREPARING Using the Kensington security system (optional) Securing the TV to a wall (optional) The Kensington security system connector is located at (Depending on model) the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.
-
Page 16: Mounting On A Wall
Mounting on a wall CAUTION Disconnect the power before moving or installing An optional wall mount can be used with your LG the TV. Otherwise electric shock may occur. Television. Consult with your local dealer for a wall If you install the TV on a ceiling or slanted wall, it mount that supports the VESA standard used by your may fall and result in severe injury. -
Page 17: Tidying Cables
ASSEMBLING AND PREPARING Tidying cables Gather and bind the cables with the cable holder. Cable Holder CAUTION Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and damage to the TV may occur. -
Page 18: Making Connections
MAKING CONNECTIONS MAKING CONNECTIONS You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device. NOTE If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. -
Page 19: Connecting To A Hd Receiver, Dvd Player, Or Vcr
MAKING CONNECTIONS Connecting to a HD receiver, DVD Player, or VCR Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. -
Page 20: Connecting To A Mobile Phone
MAKING CONNECTIONS Connecting to a mobile phone Mobile High-definition Link (MHL) is an interface for transmitting digital audio/visual signals from mobile phones to television sets. NOTE Connect the mobile phone to the HDMI IN 2 (MHL) port to view the phone screen on the TV. This only works with an MHL-enabled phones. -
Page 21: Component Connection
MAKING CONNECTIONS Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could cause the image to display in black and white or with distorted color. Check to ensure the cables are matched with the corresponding color connection. -
Page 22: Composite Connection
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. VIDEO/ AUDIO L/MONO... -
Page 23: Connecting A Pc
MAKING CONNECTIONS Connecting a PC NOTE Use an HDMI connection for the best image quality. Depending upon the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. -
Page 24: Connecting To An Audio System
MAKING CONNECTIONS Connecting to an Audio System You can use an optional external audio system instead of the built-in speaker. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. -
Page 25: Connecting A Usb Device
MAKING CONNECTIONS Connecting a USB Device Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV. (*Not Provided) -
Page 26: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. - Page 27 REMOTE CONTROL FLASHBK PICTURE Changes the image mode. INFO Shows information on the current program. AUDIO SOUND Changes the sound mode. SETTINGS Accesses the main menu. Q.MENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. Selects menus or options and confirms your input. BACK Returns to the previous screen.
-
Page 28: Watching Tv
WATCHING TV WATCHING TV When the basic settings are complete, press the OK button. NOTE Turning the TV on for the first time If you do not complete the initial setting, it will appear whenever the TV turns on. Disconnect the power cord from the power outlet When you turn the TV on for the first time, the Initial when you do not use the TV for a long period of setting screen appears. -
Page 29: Using The User Guide
USING THE USER GUIDE USING THE USER GUIdE User Guide OPTION > To set language User Guide allows you to easily access detailed TV SETTINGS OPTION Language information. You can select the language of the menu displayed on the screen and digital CHANNEL Setting sound broadcasting. -
Page 30: Specifications
Operating Humidity Less than 80 % Storage Temperature -20 °C ~ 60 °C (-4 °F ~ 140 °F) Storage Humidity Less than 85 % 60LN5400 MODELS (60LN5400-UA) 1,359 x 852 x 297 (mm) With stand 53.5 x 33.5 x 11.6 (inches) - Page 31 SPECIFICATIONS HDMI (PC) supported mode Component port connecting information Horizontal Vertical Component ports on the TV Resolution Frequency (kHz) Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 Video output ports 640 x 480 31.469 59.94 on DVD player 800 x 600 37.879 60.31...
-
Page 32: Maintenance
MAINTENANCE / TROUBLESHOOTING MAINTENANCE Cleaning Your TV Clean your TV regularly to keep it at peak performance and to extend the product lifespan. CAUTION Before cleaning, turn the power off and disconnect the power cord and all other cables. When the TV is left unattended or unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. - Page 33 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL dEVICE SETUP To obtain the external control device setup information, please visit www.lg.com.
- Page 35 CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE • The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases.
- Page 36 LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA Register your product Online! www.lg.com The model and serial numbers of the TV are located on the back and one side of the TV.
-
Page 37: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... - Page 38 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button Q.Menu R/C Button CH -, PR - R/C Button List, - (ATSC Only) R/C Button Volume + R/C Button...
- Page 39 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 40 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) RS-232C with RS-232C Cable (Legacy) RS-232C IN Phone jack Type (CONTROL & SERVICE) (PC) (TV) • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and RS-232C IN (CONTROL &...
-
Page 41: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... - Page 42 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 43 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute ► To control Power Off of the set. on, TV will not display OSD.
- Page 44 EXTERNAL CONTROL DEVICE SETUP 09. Tint (Command: k j) 14. Color(Colour) Temperature (Command: x u) ► To adjust the screen tint. ► To adjust colour temperature. You can also adjust You can also adjust tint in the PICTURE menu. Color(Colour) Temperature in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64...
- Page 45 EXTERNAL CONTROL DEVICE SETUP * Digital Terrestrial/Cable/Satellite Data 05: Input Source (Analogue) - 00 : Terrestrial TV (ATV) [Data 00][Data 01]: Channel Data - 01 : Cable TV (CATV) Data 00 : High Channel data * Digital Terrestrial/Cable Data 01 : Low Channel data - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 00 : xx (Don't care) Data 02 : Input Source (Digital)
- Page 46 EXTERNAL CONTROL DEVICE SETUP [Data 01][Data 02]: Major Channel Number 20. Control Back Light (Command: m g) Data 01: High byte Channel Data • For LCD TV / LED TV Data 02: Low byte Channel Data ► To control the back light. - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) Transmission [m][g][ ][Set ID][ ][Data][Cr] [Data 03][Data 04]: Minor/Branch Channel Number...
- Page 47 11 11 EXTERNAL CONTROL DEVICE SETUP 22. 3D(Command: x t) (only 3D models) 23. Extended 3D(Command: x v) (only 3D models) (Depending on model) (Depending on model) ► To change 3D option for TV. ► To change 3D mode for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [Data 01][Cr]...