gENErAL FUNCTIONS AND CONTrOLS (Cont.)
you hold either of the buttons down it will search quickly through the track.
B. SD PLAYER - REAR (FIGURE 2)
21. AUDIO A OUT R & L - These jacks send a left and right analog mono output signal. Use these
jacks to send standard audio to a mixer or receiver. The red colored jack represents the right channel
output and white jack represents the left channels output.
22. CHANNEL A CONTROLLER JACK - Connect the supplied mini-plug from the CUE jack on the
rear of your unit to the CONTROL out jack of a compatible American Audio
This will enable the "Q-Start" function. This feature is only available on American Audio
DJ
"Q" series mixers.
®
23. AUDIO B OUT R & L - These jacks send a left and right analog mono output signal. Use these
jacks to send standard audio to a mixer or receiver. The red colored jack represents the right channel
output and white jack represents the left channels output.
24. CHANNEL B CONTROLLER JACK - Connect the supplied mini-plug from the CUE jack on the
rear of your unit to the CONTROL out jack of a compatible American Audio
This will enable the "Q-Start" function. This feature is only available on American Audio
DJ
"Q" series mixers.
®
25. POWER CONNECTOR - Plug in the provided power adapter here. Only use the provided power
adapter.
American Audio
- www.americanaudio.us - SDJ-1™ Instruction Manual Page 12
©
®
or American DJ
mixer.
®
®
or American
®
or American DJ
mixer.
®
®
or American
®