Table of Contents
Advertisement
Cable TV (CATV) Connection
■ A -ohm coaxial cable connector is built into the set for easy hookup.
When connecting the -ohm coaxial cable to the set, connect the -
ohm cable into the ANT. terminal.
■ Some cable TV companies offer premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the converter/descrambler provided by your cable TV
company is shown in the diagram below.
RF switch
(not included)
OUT
VHF/UHF IN
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■ Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
ALBA
HD Ready LCD TV User Manual Helpline: 0845 604 0105
A
IN
B
Cable TV converter/
descrambler
(not included)
2 set signal
splitter
Cable TV Line
(not included)
Advertisement
Table of Contents
