Table of Contents
Advertisement
DOOR REMOVAL / REVERSAL INSTRUCTIONS
To Remove Refrigerator Handle:
(Handles may be easier to reverse while doors
are off.)
1. Remove two screws attaching handle to
top of
refrigerator
door.
2. Remove
button plug
using edge of
putty knife.
3. Remove
screw on
side of
refrigerator
door and
remove
handle.
Figure 3 - Handle Reversal
4. Reverse
freezer and refrigerator handles as shown in
figure 3.
To attach Refrigerator Handle:
1. Secure side of handle to door and replace
plug button.
2. Secure handle to top of door.
Button
Plug
Refrigerator Door Without Trim
NOTE
Trim lock must be removed and installed by
sliding over the two donut shaped areas.
12
Removing Stainless steel Doors
and handles
Use care when using tools near surface of
stainless steel doors to avoid scratching.
To Remove Doors
Stainless steel doors are not reversible. Follow
these steps to remove doors.
1. Remove toe grille and top hinge cover.
2. Remove top hinge and lift freezer door off
3. Unscrew center hinge bin using adjustable
4. Lift refrigerator door off of bottom hinge
5. Remove center hinge and shim by
6. Remove bottom hinge. Reinsert two
7. Reverse steps 1 - 6 to reinstall doors
To Remove Handles
Screw
1. Firmly hold freezer handle while loosening
2. Repeat step 1 for refrigerator door.
Handle
Screw
Shoulder
Screw
CAUTION
of center hinge pin. Set door aside.
wrench and save for reassembly. Ensure
plastic washer stays on hinge pin.
and set aside.
removing inside screw and loosening two
outside screws enough to allow hinge to
slide out.
outside screws in holes and tighten.
set screws with 3/32" allen wrench.
Remove freezer handle.
Set
Screw
Shoulder
Screw
Handle
Set
Screw
Advertisement
Table of Contents
