Fujitsu LifeBook P2110 Bios Manual page 24

Lifebook p series
Hide thumbs Also See for LifeBook P2110:
Table of Contents

Advertisement

L i f e B o o k P S e r i e s B I O S
Table 16: Fields, Options and Defaults for the Power Menu
Menu field
Options
Standby
• Off
Timeout:
• 1 to 16
Minutes
Auto
• Off
Suspend
• 5 to 60
minutes
Timeout:
Suspend
• Suspend
Mode:
• Save to Disk
Auto Save
• Off
to Disk:
• After 1 Hour
Resume
• Off
On
• On
Modem
Ring:
Resume
• Off
On Time:
• On
Resume
–—
Time:
Advanced
–—
Features:
24
Default
Description
[4 Minutes]
Sets the length of time without any user input device activity
before the CPU is set to half speed and the display and the hard
drive are turned off. If you choose a factory combination of param-
eters this field will display the setting. If you choose to customize
the parameters you will be able to set it yourself.
[15 Minutes]
Sets the length of time without any I/O activity before your note-
book goes into Suspend mode. If you choose a factory combina-
tion of parameters this field will display that setting. If you choose
to customize the parameters you will be able to set this yourself.
Off has no inactivity suspension.
[Suspend]
Sets the form of suspension state. If you choose Suspend, you will
suspend operation with power to system memory, and everything
else powered down or in a very low power state. If you choose
Save-to-Disk your notebook will save all of system memory and
the operating parameters to the hard drive before turning your
notebook to the pseudo-off condition.
[Off]
When set to "After 1 Hour", your notebook will
automatically save all system memory and the operating
parameters to the hard drive and go to pseudo-off if the notebook
is left in Suspend mode for more than an hour.
[Off]
Sets whether or not to Resume from a suspension state when a
message is received by telephone line. This feature will not operate
if the Save-to-Disk mode is enabled. This feature applies to internal
and external modems.
[Off]
Sets whether or not to resume from a suspension state at a
designated time. This feature is available from either the Suspend
or Save-to-Disk modes.
[00:00:00]
Sets the designated time, on a 24-hour clock, when the notebook
is to automatically resume operation from the Suspend state. The
format of the clock setting is hours:minutes:seconds. Each segment
of the time is set separately, either by incrementing or by typing in
the numbers. You move between the segments with the [Tab] key
or the [Shift]+[Tab] keys. This only applies when Resume on Time is
set to On.
–—
When selected, opens the Advanced Features submenu which
allows setting additional power saving parameters.

Advertisement

Table of Contents
loading

Table of Contents

Save PDF