ASROCK H87E-ITX/ac User Manual page 66

IO-L (CHA)
Configure IO latency for channel A.
IO-L (CHB)
Configure IO latency for channel B.
ODT WR (CHA)
Configure the memory on die termination resistors' WR for channel A.
ODT WR (CHB)
Configure the memory on die termination resistors' WR for channel B.
ODT NOM (CHA)
Use this to change ODT (CHA) Auto/Manual settings. The default is [Auto].
ODT NOM (CHB)
Use this to change ODT (CHB) Auto/Manual settings. The default is [Auto].
Command Tri State
Enable for DRAM power saving.
MRC Fast Boot
Enable Memory Fast Boot to skip DRAM memory training for booting faster.
DIMM Exit Mode
Select Slow Exit to reduce power consumption, or Fast Exit for better performance.
FIVR Configuration
FIVR Switch Frequency Signature
Select whether to boost or lower the FIVR Switch Frequency.
FIVR Switch Frequency Offset
Configure the percentage of frequency boost or deduction.
CPU Override Voltage
Configure the voltage added to the CPU when the system is under heavy load.
CPU Voltage Offset
Configure the dynamic CPU voltage added to the CPU.
62