Fujitsu LifeBook P8010 User Manual page 109

Running Recovery and Utility from hard disk
1
Cursor down to <Recovery and Utility> and press the [Enter] key.
2
While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen.
3
When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next].
4
When the Operating System dialog appears, click [Next].
5
If necessary, enter your password, then click [OK].
6
When System Recovery Options window appears, click on Recovery and Utility.
7
The Recovery and Utility screen appears on the screen with three tabs: Diagnostics,
Recovery and Utility. Please note that Diagnostics tab is not supported on certain LifeBook/Stylistic models
when running Recovery and Utility from the hard disk. In order to restore the operating system, please insert
the "Recovery and Utility" disc in the CD/DVD drive and use the Start Recovery function under the Recovery
tab. For more information about the tabs, go to
Running Recovery and Utility from the disc
T
HIS DISC CAN ONLY BE USED WITH THE SYSTEM WITH WHICH IT WAS PURCHASED
Booting from the Optical Drive
1
Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left
mouse or touchpad button; the TrustedCore Menu will appear.
2
Select the Boot Menu from the TrustedCore Menu.
3
Insert the Recovery and Utility Disc into the drive tray.
4
Highlight the CD/DVD option, then click [OK].
Procedure for using Recovery and Utility disc
1
Turn on the power to your system.
"Recovery and Utility tabs" on page 110
109 - Restoring Your Pre-installed Software
.
.