Fujitsu LifeBook E8420 User Manual page 90

6
Align the memory upgrade module with the part side up. Align the connector edge of the memory upgrade
module with the connector slot in the compartment. Note that the memory modules will be "stacked" when both
are installed.
Figure 22. Opening the Memory Compartment
7
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
8
Replace the cover and reinstall the screws.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
O
NCE IT IS INSTALLED
CAPACITY
,
YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY
.
85 - Memory Upgrade Module
Figure 23. Installing a Second Memory Module
.