Fujitsu LifeBook C-6651 Bios Manual page 12

L i f e B o o k C S e r i e s B I O S
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu
provides the ability to set the I/O addresses and
interrupt levels for the infrared, and parallel
ports of your notebook.
C A U T I O N
I/O addresses, DMA channels, and Interrupt levels can
be entered in various ways, including via the BIOS setup
utility, the control software for the I/O device, or the
hardware. If any two ports or devices have the same
I/O address assigned, your notebook will not function
normally. Please keep a record of original settings
before making any changes in the event that a
restoration is required. See your hardware and software
documentation as well as the setup utility to determine
settings, limitations, etc.
Infrared Port:
Mode:
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
Parallel Port:
Mode:
I/O Address:
Interrupt:
F1 Help
ESC Exit
12
PhoenixBIOS Setup Utility
Advanced
Serial/Parallel Port Configurations
Select Item -/Space
Select Menu
Figure 5. Serial/Parallel Port Configuration Submenu
P O I N T S
To prevent IRQ and address conflicts, avoid changing
n
the default settings. If you must change the settings,
you can call 1-800-8FUJITSU for technical assistance.
The BIOS will warn you of a resource conflict by plac-
n
ing a yellow asterisk next to each device that is in
conflict.
All I/O addresses in Table 5 are in hexadecimal.
n
[Enabled]
[FIR]
[2E8 - 2EF]
[IRQ 3]
[400-43F]
[DMA 3]
[Enabled]
[Bi-directional]
[378-37F]
[IRQ 7]
Change Values
Enter Select Sub-Menu
Item Specific Help
[Disabled]
The port is disabled.
[Enabled]
The port is enabled
with user configuration.
[Auto]
The port is configured
depending on 'Plug &
Play OS' setting.
F9 Setup Defaults
F10 Save and Exit