Table of Contents
Advertisement
The following table describes the appearance of individual icons in the Status display
and the status indicated when the icon is displayed. (If an icon is not displayed, it
indicates that the related system function is off or inactive.)
Icon
Power icon.
Indicates system
state.
DC Input icon.
Charging icon
(arrow displayed
near Battery
Gauge icon).
Battery Gauge
icon.
This icon
displays a
number of "cells"
to indicate the
status of the
battery pack.
(Displayed when
Power switch is
on or battery
pack is
charging.)
Hard Disk Drive
Access icon.
PC Card Access
icons.
System Features
Continuous:
System on (running).
Blinking:
Suspend-to-RAM mode.
Not displayed: System in Fully Off state or
Suspend-to-Disk mode.
See "System States" in Chapter 2 for more details.
Displayed when DC power is connected and the Power switch
is in the On position, or the system is charging.
Continuous:
Battery charging.
Blinking:
Battery temperature too high, charging stopped.
Not displayed: Battery not charging.
Charge 90% or higher
Charge 75% or higher
Charge 50% or higher
Charge 25% or higher
Continuous:
12% - 25% charge.
Blinking cell:
Less than 12% charge (low battery warning).
Critically low battery charge. (System operation is suspended
automatically.)
Cell short fault. Battery pack is bad.
Displayed when IDE hard disk drive is active.
Icon 1:
Displayed when PC Card slot 1 is active.
Icon 2:
Displayed when PC Card slot 2 is active.
System Function
Status Display
1-5
Advertisement
Table of Contents
