Flexible Bay Devices; Removing And Installing Modular Devices - Fujitsu DVD Player User Manual

L i f e B o o k S S e r i e s – S e c t i o n T w o
Flexible Bay

Flexible Bay Devices

Your Fujitsu LifeBook notebook contains a Flexible Bay.
The Flexible Bay can accommodate a modular DVD
drive, CD-ROM drive, CD-RW drive, SuperDisk drive,
Lithium ion battery, modular PC Card slot adapter,
modular Digital Bay Camera and weight saver.
(Figure 2-19)
Your Flexible Bay will have one of the following devices
installed. These devices are also optional and can be
purchased separately. (Figure 2-20)
Modular DVD drive: This allows you to access movies,
software and audio DVD/CDs.
Modular CD-ROM drive: This allows you to access
both software and audio CDs.
The following are also Flexible Bay optional devices
which can be purchased separately. (Figure 2-20)
Modular CD-RW drive: This allows you to access
both software and audio CDs as well as the ability
to write to CDs.
Modular DVD/CD-RW combo drive: This allows you
to access movies, software and audio DVD/CDs, as
well as the ability to write to CDs.
Modular SuperDisk drive: This is an optional
120MB floppy disk drive made by Imation, for use
with your notebook.
Modular Lithium ion battery: This is a rechargeable
battery that can be used to power your LifeBook note-
book when an adapter is not connected.
Weight Saver: This is used to fill the bay when no
device is needed.
Modular Digital Bay Camera: This is a Digital Camera
that can be used to take digital stills or video.
22
Flexible Bay Eject Lever
Figure 2-19 Flexible Bay
SuperDisk 120 Drive
DVD/CD-ROM/
CD-RW/
Combo Drive
Lithium ion Battery
Weight Saver
Digital Bay Camera
REMOVING AND INSTALLING
MODULAR DEVICES
There are two ways to remove and install modular
devices in the Flexible Bay:
Cold-swapping: swapping devices while your
LifeBook notebook is powered off.
Hot-swapping: swapping devices while your
system is active using BayManager
(Windows 98 only) or the Unplug/Eject icon from
your desktop (Windows 2000). Note that if the weight
saver is installed rather than a modular device, it is not
necessary to use BayManager when removing it.
W A R N I N G
You should never leave your Flexible Bay empty when
the notebook is in operation. If left empty, dust or for-
eign matter may accumulate inside the notebook.
Figure 2-20 Flexible Bay Devices
™
software