LG 42PC1DA - - 42" Plasma TV Owner's Manual page 35

t,_,_51,2Deno,_! 06/9/2 10:21 _ Page 34
CONNECTIONS & SETUP
Screen Setup for PC mode
When RGB connect to PC output and select the RGB-PC in Main
InpuL this function is used.
When HDMI IN 1 (DVl) connect to PC output and select HDMI ]/DVI
inpuL this function is used.
In RGB-DTV mode, SIZE and PHASE is not available.
Adjustment for screen Position, Size, Phase, Reset
N
O
Z
Z
m
Z
m
C
O Press the ADJUST bu_on and then use A or T button to
select Position, Size, or Phase.
0
0
Press the ENTER button and then use A Y @ _ button to
make appropriate adjustments.
u The Phase adjustment range is -16 ~ +16.
mThe Size adjustment range is -30 ~ +30.
Press the ENTER button.
Initializing (Reset to original factory values)
To initialize the adjusted values
Position
Size
Phase
@@@
This function is to adjust picture
to left!right and up/down as you
prefer.
This function is to m_nimize any
vertical bars or stripes visible on
the screen background. And the
horizontal screen size will also
change.
This function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters+ In HDMIiDVI-PC mode_
PHASE _s not available.
O Press the ADJUST button and then use & or Y button to
select Reset.
Press the ENTER button and then use 41 or _ button to
select Yes.
Press the
ENTER button.
34
@@@