D-Link GO-SW-5GE Specifications page 3

Technical Specifications
Switching Fabric
Standards
Data Transfer Rates
Packet Filtering/Forwarding Rates
Network Cables
Media Interface Exchange
LED Indicators
Switching Method
MAC Address Table
RAM Buffer
Jumbo Frames
QoS
General Specifications
DC Input
Power Consumption
Heat Dissipation
MTBF
Operating Temperature
GO-SW-5GE & GO-SW-8GE
GO-SW-5GE
• 10Gbps
• IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair
copper)
• IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-
pair copper)
• Ethernet:
- 10 Mbps (half duplex), 20 Mbps (full duplex)
• Fast Ethernet:
- 100 Mbps (half duplex), 200 Mbps (full duplex)
• Ethernet: 14,880 pps
• Fast Ethernet: 148,800 pps
• 10BASE-T:
- UTP CAT 3, 4, 5/5e (100 m max.)
- EIA/TIA-586 100-ohm STP (100 m max.)
• Auto MDI/MDIX adjustment for all ports
• Per port: Link/Activity/Speed
• Store-and-forward
• 2K entries
• 128KB per device
• 9,000 Bytes
• 4 Queues, strict mode
• External 5 V/1 A Level "V" Power Adapter
• Power On (Standby):
DC input: 0.5 watts
AC input: 1.0 watts
• Maximum:
DC input: 2.01 watts
AC input: 3.10 watts
• Power On (Standby) AC input: 3.41 BTU/h
• Maximum DC input: 6.854 BTU/h
• 1,688,338 hours
• 32 to 130 ˚F (30 to 50 ˚C)
5/8 Port Gigabit Metal Desktop Switch
GO-SW-8GE
• 16Gbps
• ANSI/IEEE 802.3 NWay auto-negotiation
• IEEE 802.3x Flow Control
• IEEE 802.1p QoS
• IEEE 802.3az Energy-Efficient Ethernet (EEE)
• Gigabit Ethernet:
-2000 Mbps (full duplex)
• Gigabit Ethernet: 1,488,000 pps
• 100BASE-TX, 1000BASE-T:
- UTP CAT 5/5e (100 m max.)
- EIA/TIA-568 100-ohm STP (100 m max.)
• Per device: Power
• 8K entries
• Power On (Standby):
DC input: 0.55 watts
AC input: 1.0 watts
• Maximum:
DC input: 2.8 watts
AC input: 4.5 watts
• Power On (Standby) AC input: 3.41 BTU/h
• Maximum DC input: 9.548 BTU/h
• 2,053,751 hours