Adjusting The Audio Settings - Vizio M501d-A2R User Manual

aDjuStiNg the auDiO SettiNgS

To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The Audio menu is
displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change the
setting:
• Balance - Adjusts the
loudness of the audio
output from the left and
right speakers.
• Lip Sync - Adjusts the syn-
chronization between the
display image and the
accompanying audio track.
• TV Speakers - Turns the built-in speakers on or off.
Note: When TV speakers are set to On, DTS signals
cannot be passed through digital audio outputs.
• Surround Sound - DTS Studio Sound
surround sound solution which delivers an immersive
surround sound experience from the TV's internal
speakers. Additionally, Studio Sound completes the
entertainment experience by maintaining a steady
volume while watching programming and movies,
providing deep, rich bass, and delivering crisp details
and clear, intelligible dialog. Select On or Off.
VIZIO
Audio
-
+
Balance 0
-
+
Lip Sync 0
TV Speakers On
Surround Sound On
Volume Leveling On
Digital Audio Out PCM
Analog Audio Out Fixed
Equalizer Settings
Reset Audio Mode
™ is a feature-rich
24
• Volume Leveling - DTS TruVolume
volume levels during transitions between program
content, AV formats and input sources.
• Digital Audio Out - Changes the type of processing for
the Optical output when connected to a home theater
audio system. Select PCM or Bitstream.
• Analog Audio Out - Sets the volume control properties
Wide Zoom Normal Panoramic
for the analog RCA (red/white) connectors when
connected to a home theater audio system. Select
Variable to control the external speakers' volume from
the TV's volume controls, or select Fixed to control the
Exit 2D 3D
external speakers' volume from your home theater system
controls.
ABC
• Equalizer Settings - Adjusts the boost or attenuation
of different frequencies. Change the Audio Mode by
Input Wide CC
selecting Flat, Dynamic, Center, Bass, Boost, or Bright. To
change the equalizer settings yourself, set EQ Mode to
Advanced, then adjust each frequency or set EQ Mode
to Basic, then adjust Bass and Treble settings.
Sleep
Picture Audio
Timer
• Reset Audio Mode - Restores the audio settings to the
factory defaults. See Resetting the Audio Settings on
page 25 .
Network Settings Help
4. When you have finished adjusting the audio settings, press
the EXIT button on the remote.
5
maintains consistent
™