Connecting To An External Source; Selecting Basic Options; Setting Up The First Time - Insignia NS-FSDVDR User Manual

08-1031_NS-FSDVDR.fm Page 12 Wednesday, March 12, 2008 2:53 PM
• Connect an audio coaxial digital cable (not
provided) from the DIGITAL AUDIO
OUTPUT jack on your recorder to the
DIGITAL AUDIO IN jack on the back of your
digital audio device, such as a Dolby Digital
decoder, MD deck, or DAT deck.
Digital audio device
COMPONENT COMPONENT
VIDEO IN VIDEO IN VIDEO OUTPUT VIDEO OUTPUT
IN IN
S-VIDEO S-VIDEO
OUT OUT
IN IN
OUT OUT L L
R R
ANTENNA ANTENNA AUDIO IN AUDIO IN
(L1) (L1)
Back of recorder
Connection
If the device is connected to the
component jacks and is compatible
with Dolby Digital.
If the device is not connected to the
component jacks or is not
compatible with Dolby Digital.
For an MD or DAT deck.
See "Adjusting Dolby Digital audio" on page 25.

Connecting to an external source

You can connect an external source to your
recorder by using either the LINE2 (Front) or
LINE1 (Rear) input jacks.
When connecting an external source to the
monaural output to this unit, use AUDIO L jack
of LINE2 (Front).
Use commercially available S-Video or video
cable and an audio cable for this connection.
To connect an external source to the front
jacks on your recorder:
1 Connect a video cable or S-Video cable (not
both) from the OUTPUT jacks on the external
source (such as a VCR or camcorder) to the
appropriate INPUT jack on the front of your
recorder.
2 Connect audio cables (L/R) from the AUDIO
OUT jacks on the external source to the
AUDIO IN jacks on the front of your recorder.
External source
Audio cables (L/R)
OUTPUT
S- VIDEO VIDEO AUDIO
L R
Video or
S-Video
cables
Front of recorder
12
COAXIAL
Audio coaxial
digital cable
VIDEO OUT VID VIDEO OUT
Y Y
DIGITAL AUDIO OUTPUT
PCM / BITSTREAM
L L
P P /C /C
B B B B
R R
P P R R /C /C R R COAXIAL
AUDIO OUT AUDIO OUT
Setting
PCM Dolby Digital
- Stream
- PCM
- PCM

Selecting basic options

Setting up the first time

S-VIDEO VIDEO L AUDIO R
OPEN/CLOSE CHANNEL REV FWD STOP PLAY POWER
REC SPEED REC/OTR
S-VIDEO VIDEO L AUDIO R
www.insignia-products.com
Insignia NS-FSDVDR DVD recorder
3 Select the correct video source by pressing
002 (Line2/front jacks) on the remote control.
To connect an external source to the rear
jacks on your recorder:
1 Connect a video cable or S-Video cable (not
both) from the OUTPUT jacks on the external
source (such as a VCR or camcorder) to the
appropriate INPUT jack on the back of your
recorder.
2 Connect audio cables (L/R) from the AUDIO
OUT jacks on the external source to the
AUDIO IN jacks on the back of your recorder.
External source
AUDIO
R
Video or S-Video
cables
Audio VIDEO IN
S-VIDEO
cables
IN
L
(L/R)
R
AUDIO IN
VIDEO IN
VIDEO OUT VIDEO OUT
S-VIDEO
DIGITAL AUDIO OUTPUT DIGITAL T T AUDIO OUTPUT
IN
PCM / BITSTREAM PCM / BITSTREAM
L
R
AUDIO IN COAXIAL COAXIAL
(L1)
Back of recorder
3 Select the correct video source by pressing
001 (Line1/back jacks) on the remote control.
The first time you turn on your recorder, you are
prompted to select initial settings.
To set up the first time:
1 Make sure that your recorder is connected to
a TV and that the power cord is plugged into
a power outlet.
2 Press POWER to turn on your recorder.
3 Turn on the TV, then select the TV input
source for the jacks your recorder is
connected to.
The following table lists some of the more
common TV brands and their input sources.
For more information, see the guide that
came with the TV.
TV video input sources
Brand Input source
Admiral AUX
Curtis Mathis LINE1, LINE2, 00, 90, 91, 92, 93
GE INPUT, TV/VCR, 00, 90, 91, 92, 93
Hitachi INPUT, AUX
JVC VIDEO, VIDEO1, VIDEO2, VIDEO3
Kenwood AUX
LXI-Series 00
Magnavox AUX CHANNEL
OUTPUT
VIDEO S -VIDEO
L