Prepare The Remote Control; Connect Power; Set Time And Date; Turn On - Philips DC390/05 User Manual

1
Open the battery compartment.
2
Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3
Close the battery compartment.
Caution
•
Remove battery if it is exhausted or will not be
used for a long time.
•
Batteries contain chemical substances, so they
should be disposed of properly.
•
Perchlorate Material-special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine, or fire. Never discard batteries
in fire.
1
Open the battery compartment.
2
Insert one button battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Note
•
If you are not going to use the remote control
for a long time, remove the batteries.

Connect power

Caution
•
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
•
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
•
Before connecting the AC power cord, ensure
you have completed all other connections.
12 EN
Note
•
The type plate is located on the bottom of the
main unit.
1
Connect the AC power cord to the wall
outlet.

Set time and date

1
In standby mode, press and hold SET
TIME for two seconds.
» The hour digits begin to blink.
2
Press to select the 12/24 hour
format.
3
Press / to set the hour
4
Press SET TIME to confirm.
» The minutes digits begin to blink.
5
Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
•
In 12 hour format, [MONTH--DAY] is
displayed.
•
In 24 hour format, [DAY--MONTH] is
displayed.
•
You can press to toggle between 12 hour
format and 24 hour format during the whole
process.

Turn on

1
Press POWER.
» The unit switches to the last selected
source.
MP3 LINK FM
ANTENNA