LG MS659 Quick Reference Manual page 74

Safety
72
consultation with the FDA and the other
federal health and safety agencies. The
FCC limit for RF exposure from wireless
phones is set at a Specific Absorption
Rate (SAR) of 1.6 watts per kilogram
(1.6 W/kg). The FCC limit is consistent
with the safety standards developed by
the Institute of Electrical and Electronic
Engineering (IEEE) and the National
Council on Radiation Protection and
Measurement. The exposure limit takes
into consideration the body's ability
to remove heat from the tissues that
absorb energy from the wireless phone
and is set well below levels known to
have effects. Manufacturers of wireless
phones must report the RF exposure
level for each model of phone to the
FCC. The FCC website (http://www.fcc.
gov/cgb/cellular.html) gives directions
for locating the FCC identification
number on your phone so you can find
your phone's RF exposure level in the
online listing.
8. What has the FDA done to
measure the Radio Frequency
energy coming from wireless