Asus H81-PLUS User Manual page 47

H81-plus user's manual
Table of Contents

Advertisement

CPU Internal Power Switching Frequency
CPU Internal Power Fault Control
CPU Internal Power Configuration
Idle Power-in Response [Auto]
Allows you to set the idle power-in response. Configuration options: [Auto] [Regular]
[Fast]
Idle Power-out Response [Auto]
Allows you to set the idle power-out response. Configuration options: [Auto] [Regular]
[Fast]
Power Current Slope [Auto]
Allows you to set the power current slope. Configuration options: [Auto] [Level -4] ~
[Level 4].
Power Current Offset [Auto]
Allows you to set the power current offset. Configuration options: [Auto] [100%] [87.5%]
[75%] [62.5%] [50%] [37.5%] [25%] [12.5%] [0%] [-12.5%] [-25%] [-37.5%] [-50.0%]
[-62.5%] [-75%] [-87.5%] [-100%]
Power Fast Ramp Response [Auto]
Allows you to increase to enhance the response of the voltage regulator during the
load transient. Configurations: [Auto] [0.00] - [1.50].
CPU Internal Power Saving Control
2-20
Frequency Tuning Mode [Auto]
Allows you to set the frequency tuning mode. Configuration options: [Auto]
[+] [-]
Thermal Feedback [Auto]
When enabled, it allows CPU to take precautionary actions when the
thermal of the external regulator exceeds the limit.Configuration options:
[Auto] [Disabled] [Enabled]
CPU Integrated VR Fault Management [Auto]
Allows you to manage the CPU Integrated VR fault. Configuration options:
[Auto] [Disabled] [Enabled]
CPU Integrated VR Efficiency Management [Auto]
Allows you to manage the CPU integrated VR efficiency. Configuration
options: [Auto] [High Performance] [Balanced]
Power Decay Mode [Auto]
Enable to improve power saving on the Fully Integrated Voltage Regulator
as the processor enters low current mode. Configuration options: [Auto]
[Disabled] [Enabled]
Power Saving Level 1 Threshhold [Auto]
Allows you to set the power saving level 1 threshhold.
Use the <+> and <-> keys to adjust the value.
Power Saving Level 2 Threshhold [Auto]
Allows you to set the power saving level 2 threshhold.
Use the <+> and <-> keys to adjust the value.
Chapter 2: Getting started

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents