Mode; Tmovie (Video); Xd-Picture Card Standard Shooting Time - FujiFilm FinePixA204 Owner's Manual

T MOVIE ( VIDEO )
T

MODE

1
Set the Mode switch to " T ".
This mode allows you to shoot movies up to 20
#
seconds (at the setting) or 80 seconds (at the
$
setting) without sound. (See P.51 for
information on quality settings.)
hMovie format: Motion JPEG (➡P.118)
(320 × 240 pixels)
#
(160 × 120 pixels)
$
selectable
10 frames per second
Without sound
●
!
Select Macro mode for close-up shots (➡P.43).
●
!
Depending on the available space on the xD-Picture
Card, the available shooting time per movie may be
shorter.
●
!
You cannot switch the LCD monitor off in this mode.
●
!
It may not be possible to play back your movie on
48
other cameras.
2
２０ｓ ２０ｓ
ＳＴＡＮＤＢＹ ＳＴＡＮＤＢＹ
The available shooting time and the " œ
message are shown on the LCD monitor.

■ xD-Picture Card standard shooting time

Quality mode
xD-Picture Card
Capacity
# $
DPC-16 (16 MB) 94 sec. 5.0 min.
Approx. Approx.
DPC-32 (32 MB) Approx. 191 sec. Approx. 10.1 min.
DPC-64 (64 MB) Approx. 6.4 min. Approx. 20.2 min.
DPC-128 (128 MB) 12.9 min. 40.6 min.
Approx. Approx.
✽ The available shooting time displayed on the camera
for a new xD-Picture Card formatted in the camera.
3
ＳＴＡＮＤＢＹ ＳＴＡＮＤＢＹ
"
Zoom bar
During movie shooting, the lens is fixed at the
wide-angle zoom setting and only the digital
zoom can be used.
Use "a" or "b" to zoom in and out. A zooming
bar is displayed on the LCD monitor.
The focal distances and maximum zoom ratios
for the digital zoom are shown below.
hDigital zoom focal distance (35 mm camera
equivalent)
Approx. 38 mm to 95 mm
Max. zoom scale: 2.5×
4
２０ｓ ２０ｓ
When you press the shutter button, the camera
starts shooting.
●
!
You do not need to hold down the shutter button.
●
!
The focus is fixed at 80 cm (2.6 ft.) to infinity.
●
!
The white balance is fixed during shooting, but the
exposure varies automatically to suit the scene being
shot.
●
!
The image shown on the LCD monitor before you
take the shot may differ in its brightness, color, etc.
from the image shown on the monitor during movie
recording.
The white balance is set automatically when you
press the shutter button.
3
Continued on next page...
49