Specifications - Pioneer HTP-105 Service Manual

HTP105/205-SW
A floor, bass-reflext type, with a built-in amplifier having a PVC-sheet finishint with a wood pattern.

7. SPECIFICATIONS

Cabinet
Speaker
Power Amplifier
Input
(Sensitivity at 200 Hz/
impedance)
*Line level input
Crossover Frequency
Outline Dimension
(W x H x D)
Weight
Power Requirements
Power Consumption
Accesories
Note: Specifications and design subject to possible modification
without notice due to improvements.
10
A floor, bass-reflext type, with a built-in amplifier having a PVC-sheet finishint with a wood
pattern.
20 cm (8 inch)
Continuous Average Power Output is 50 Watts* min, at 4 ohms from 30 Hertz to 200 Hertz with
no more than 1% total harmonic distortion.
180 mV / 33k ohms
120 Hz
291 x 361 x 330 mm
11-7/16 x 14-9/16 x 13 inch
9.8 kg (21 lb 10 oz)
120 VAC, 60 Hz
60W
RCA cord (10ft.) x 1
Operating instructions x 1
HTP105/205-SW
* Measured pursuant to the Federal Trade Commission's Trade
Regulation rule on Power Output Claims for Amplifiers.
** Measured by Audio Spectrum Analyzer.