FujiFilm FinePix S5700 Owner's Manual page 131

Do not connect the camera to your PC
until the software installation is
completed.
1
Install FinePixViewer as instructed in the
Quick start guide.
Launching the installer manually
A Double-click the "My Computer" icon.
Windows XP users should click "My Computer" in the "Start"
*
menu.
Windows Vista users should click "Computer" in the "Start"
menu.
B Right-click "FINEPIX" (CD-ROM drive) in the "My
Computer" window (Windows Vista users: in the
"Computer" window) and select "Open".
C Double-click "SETUP" or "SETUP.exe" in the CD-ROM
window.
The way file names are displayed differs as described below
*
depending on your PC settings.
-File extensions (3-letter suffixes indicating the file type)
may be shown or hidden. (e.g. Setup.exe or Setup)
-Text may be shown normally or all in uppercase (e.g. Setup
or SETUP).
CHECK
For Windows Vista users:
When loading the bundled CD-ROM on your PC, the
"AutoPlay" window may appear. In this case, click
"SETUP.exe".
When "User Account Control" window appears, click
"Allow".
Installing other applications
You may see messages for installing ImageMixer VCD2 LE for
FinePix. Install this application as directed by the on-screen
instructions.
2
Install DirectX as directed by the on-screen
instructions and then restart your PC. If the
latest version of DirectX is already installed
on your PC, this installation is not
performed.
CAUTION
• If the latest version is already installed, this window
does not appear.
• Do not remove the CD-ROM during this procedure.
3
After restarting the PC, a message appears
stating "Installation of the FinePixViewer
has been completed".
131