Dell 2405FPW - UltraSharp - 24" LCD Monitor User Manual page 27

NOTE: The language chosen affects only the language of the OSD. It has no effect on any software running on the computer.
PIP/PBP Settings: The functions can bring up a picture of second image source. Thus you can watch 2 images from different sources at the same time.
Mode There are two sources : PIP(Picture in Picture) and PBP(Picture by Picture)
Use and
When selected PIP
PIP Source : To select an input signal for PIP. (VGA/DVI/Svideo/Composite)
Use and
Swap : To switch the main-screen and sub-screen in PIP mode.
PIP size : To adjust the size of the PIP screen.
Use and
Position : Move the PIP window.
Use and
When selected PBP
To select an input signal for PBP. (VGA/DVI/S-video/Composite/Component)
PIP Source :
Use and
To switch the main-screen and sub-screen in PBP mode.
Swap :
Brightness:
Adjust the brightness level of the picture in PIP/PBP Mode.
decreases the brightness
increases the brightness
Contrast: Adjust the contrast level of the picture in PIP/PBP Mode.
decreases the contrast
to browse and to select "Off", "PIP", or "PBP". The "Off" item means the PIP/PBP window will be closed.
to browse and to select.
to browse and to select.
to browse and to select.
to select.