Osd (On-Screen Display) Menu; How To Reconfigure; Osd Function Introduction - Asus SD222-YA Series User Manual

3.1

OSD (On-Screen Display) menu

3.1.1 How to reconfigure
Color
Picture
Input Select
Menu
1. Press the MENU button to activate the OSD menu. You may also use
the remote controller to activate the OSD by pressing the "guide" key.
2. Press  and ► button to navigate through the functions. Press
the OK button to highlight and activate the desired function. If the
selected function has a sub-menu, press and ► button again to
navigate through the sub-menu. Press the OK button to highlight and
activate the desired sub-menu function.
3. Press  and ► button to change the settings of the selected function.
4. To exit from the OSD menu, press the MENU button. Repeat step 2
and step 3 to adjust any other function.
3.1.2

OSD Function Introduction

1. Color
Select the image color you like from this function.
Color
Picture
Input Select
Menu
• Mode: There are standard, dynamic, soft, and monochrome preset
modes.
• Brightness: To adjust the luminance ranging from 0 to 100.
The
• Contrast: To adjust the contrast ranging from 0 to 100.
ASUS LCD Monitor SD222 Series
SD222
Move
SD222
Move
button is a hotkey to activate this function.
Mode
Brightness
Contrast
ASCR
Saturation
Color Temp.
Gamma
OK Exit
Mode
Brightness
Contrast
ASCR
Saturation
Color Temp.
Gamma
OK Exit
Dynamic
100
80
ON
50
User Mode
2.2
Dynamic
100
80
ON
50
User Mode
2.2
3-1