Huawei WS325 User Manual page 58

WS325 300Mbps Wireless Router
User Guide
Enable the WDS function and set the WDS mode to Repeater.

Add the wireless MAC address of router B to the WDS MAC list.

Router B:
Set the IP address of the LAN interface to 192.168.3.100.

Set the subnet mask of the LAN interface to 255.255.255.0.

Disable the DHCP server function.

Enable the DHCP relay function.

Select SSID1 for SSID (default value).

Set the name of SSID1 to my SSID that is the same as the setting on router A.

Set the WLAN channel to 1 that is the same as the setting on router A.

The WLAN encryption settings are as follows (the same as the settings on router A):

Set the security mode to WPA-PSK/WPA2-PSK.
−
Set the encryption mode to AES.
−
Set the password used for accessing the WLAN to MyPassword@2012.
−
Enable the WDS function and set the WDS mode to Repeater.

Add the wireless MAC address of router A to the WDS MAC list.

The configuration procedure is as follows:
The following procedure describes how to change the parameter settings as required. You can
retain the default settings of the parameters that do not need to be changed.
Step 1 Find and record the wireless MAC addresses of router A and router B.
1. Log in to the Web-based configuration utility of a router.
2. In the navigation tree, choose Status > Device.
The device information page is displayed.
3. Record the value of Wireless MAC.
The value of Wireless MAC is a character string that is similar to
00-E0-FC-22-33-66. This value is the wireless MAC address of the router. Suppose
the wireless MAC address of router A is AA:AA:AA:AA:AA:AA and that of router
B is BB:BB:BB:BB:BB:BB.
Step 2 Set the WLAN parameters of router A.
Issue 01 (2012-10-26)
6 Configuring Frequently Used Functions
6-27