Power - Optoma ML550 User Manual

Power

Select and press
options:
Power Saving
Select Off to disable Power Saving mode. By default, the projector is set to enter
power saving mode after 120 minutes of no activity. A warning message appears on
screen showing a 60 seconds countdown before switching to power saving mode.
Press any button during the countdown period to stop the power-saving mode.
You can also set a different delay period to enter power saving mode. The delay
period is the time you want the projector to wait without an input signal. Power saving
can be set to 30, 60, 90, or 120 minutes. If an input signal is not detected during the
delay period, the projector turns off. To turn on the projector, press the Power button.
Direct Power On
Choose On to activate Direct Power mode. The projector will automatically power
on when AC power is supplied, without pressing the Power button on the projector
control panel or on the remote control.
Projection
Allows you to select the projector mode, depending upon how the projector is
mounted.
Front: This is the default option.
y
Rear: The projector reverses the image so that you can project from behind a
y
translucent screen.
Front Ceiling: The projector turns the image upside down for ceiling-mounted
y
projection.
Rear Ceiling: The projector reverses and turns the image upside down. You can
y
project from behind a translucent screen with a ceiling-mounted projection.
Speaker
Select On or Off to turn on or turn off the speaker.
Display Hour
Display the projection time.
to activate power settings. The power menu provides the following
31
English