BenQ W1500 User Manual page 56

Test Pattern
Closed Caption
Quick Cooling
High Altitude Mode
Password
Key Lock
Reset All Settings
ISF
56 Important safety instructions
Press ENTER to display the grid test pattern. It helps you adjust the image size
and focus and check that the projected image is free of distortion.
The function is only available when the projector detects no input signal.
Closed Caption Enable
Activates the function by selecting On when the selected input signal carries
closed captions.
Captions: An on-screen display of the dialogue, narration, and sound
effects of TV programs and videos that are closed captioned (usually
marked as "CC" in TV listings).
Caption Version
Selects a preferred closed captioning mode. To view captions, select CC1,
CC2, CC3, or CC4 (CC1 displays captions in the primary language in your
area).
Enables or disables the Quick Cooling function.
Selecting On enables the function and projector cooling time will be
shortened from a normal 90-second duration to approximately 5
seconds.
A mode for operation in areas like high altitude or high temperature. See
"Operating in a high altitude environment" on page 44
Change Password
You will be asked to enter the current password before changing to a new one.
See "Utilizing the password function" on page 32
Power On Lock
Limits use of the projector to only those who know the correct password. See
"Utilizing the password function" on page 32
See "Locking control keys" on page 47
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language, Projector
Position, High Altitude Mode, Password, Key Lock, and ISF.
The ISF calibration menu is password protected and only accessible by
authorized ISF calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, please go to www.imagingscience.com or
contact the place you purchased the projector.
for details.
for details.
for details.
for details.