Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
To open the OSD menu, press "MENU" on the remote control.
•
When the OSD is displayed, use the
•
main menu. After selecting the desired main menu item, press
submenu for feature setting.
Use the
•
using the
Select the next item to be adjusted in the submenu and adjust as described
•
above.
Press "MENU" on the remote control, the screen will return to the main
•
menu.
To exit OSD, press "MENU" on the remote control again. The OSD menu
•
will close and the projector will automatically save the new settings.
Main menu
keys to select the desired item and adjust the settings by
keys.
Sub menu
keys to select any item in the
17
to enter
Setting