Dpof Set Frame; How To Specify Print Options (Dpof); How To Specify Print Options (Frame Set/Reset) - FujiFilm FinePix A330 Owner's Manual

u DPOF SET FRAME
PLAYBACK MENU
HOW TO SPECIFY PRINT OPTIONS ( DPOF )
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card. The recorded specifications include information on which frames
are to be printed.
This section gives a detailed description of how to order your prints with the FinePix
A330/FinePix A340.
On the FinePix A330/FinePix A340, you can specify only one print per image in the
DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
¬
...
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
When you insert an xD-Picture Card that contains images specified for printing on
by another camera, those print specifications are all reset and replaced by the new
print specifications.
µ
Up to 999 images can be specified on the same xD-Picture Card.
HOW TO SPECIFY PRINT OPTIONS ( FRAME SET/RESET )
1
0 1
2
ＤＰＯＦ ＤＰＯＦ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ
ＷＩＴＨＯＵＴ ＤＡＴＥ ＷＩＴＨＯＵＴ
ＷＩＴＨ ＤＡＴＥ ＷＩＴＨ
(➡P.36)
(➡P.79)
2 0
ＡＬＬ
ＤＡＴＥ
ＤＡＴＥ
(➡P.34)
1 Press the "Playback" button for approx. 1
seconds to turn the camera on in Playback
mode.
2 Press the "MENU/OK" button to display the
menu on the LCD monitor.
Press "d" or "c" to select "
１００−０００９ １００−０００９
４／２３／２００４ ３：００ ＰＭ ４／２３／２００４ ３：００
u
" DPOF.
During playback,
u
check that "
appears for the DPOF
settings that have
been specified.
ＰＭ
Continued
3
"
35