Remote Control - Insignia NS-32E740A12 User Manual

Remote control

# Button Description
Press to turn your TV on or off (Standby mode). When
(power)
1
your TV is off, power still flows into it. To disconnect
power, unplug the power cord.
TV—Press to select your TV as the input source.
COMP—Press to select the device connected to the
COMPONENT video jacks.
2
HDMI—Press one or more times to select the device
Quick Launch inputs
connected to the HDMI 1, HDMI 2, or HDMI 3 jack.
VIDEO—Press to select the device connected to the
Y-VIDEO jack.
Press to enter channel numbers and the parental
3
Numbers
control password.
Press to enter a digital sub-channel number. For more
4
information, see "Selecting a channel" on page 22.
5
ENTER Press to confirm selections or changes.
6
MENU Press to open the on-screen menu.
Press to display the program guide. For more
7 information, see "Viewing channel information" on
GUIDE
page 22.
Press to open the Input Source list, then press
to cycle through the available input sources. For more
8
INPUT
information, see "Selecting the video input source" on
page 21.
9
CH-LIST Press to open the channel list.
10
VOL+/–
Press to increase or decrease the volume.
8
NS-32E740A12 Insignia 32" LED-LCD HDTV, 720p
# Button
11
SLEEP
12 ZOOM
13
Media control
14
/RECALL
15
16 EXIT
17
INFO
18
CCD
19 FAVORITE
20
/MUTE
21 CH /
22
PICTURE
23 MTS/SAP
24
AUDIO
or
www.insigniaproducts.com
Description
Press to set the sleep timer. You can select Off, 5, 10,
15, 30, 60, 90, 120, 180, or 240 minutes. For more
information, see "Setting the sleep timer" on page 36.
Press to select the aspect ratio. For more information,
see "Adjusting the TV picture" on page 23.
Press these buttons to control the playback from an
HDMI-CEC compatible device. For more information
about HDMI-CEC compatible devices, see "Using
INlink" on page 39.
In TV mode, press to return to the previous channel.
Press to move up, down, left, or right in on-screen
menus.
Press to close the on-screen menu.
Press to display TV status information, such as the
channel number, channel name (if available), or signal
source. For more information, see "Viewing channel
information" on page 22.
Press to turn closed captioning on or off. You can select
CC Off, CC On, or CC on When Mute. For more
information, see "Turning closed captioning on or off"
on page 34.
Press to open the Favorite Channel list. For more
information, see "Setting up a favorite channel list" on
page 27 and "Viewing a favorite channel" on page 28.
Press to mute the sound. Press again to restore the
sound.
Press to change TV channels. For more information,
see "Selecting a channel" on page 22.
Press to select the video modes. You can select Vivid,
Standard, Energy Savings, Theater, or Custom.
For more information, see "Adjusting the TV picture"
on page 23.
Press to select the audio mode for an analog program.
You can select:
• MONO—Select this option if there is noise
or static on weak stereo broadcasts.
• STEREO—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Press to select the sound mode. For more information,
see "Adjusting sound settings" on page 25.