Dell PowerConnect W-IAP175P Quick Start Manual page 2

Figure 5
Security tab
Note: For additional security level options, refer to the Dell PowerConnect W-
Series Instant Access Point User Guide.
9. In the Access tab, the default is the Unrestricted option. For information about the
Network based and Role-based access rule settings, refer to the Dell PowerConnect
W-Series Instant Access Point User Guide.
Figure 6
Access tab
10. Click Finish to close the window. The new network that you created is now added
to the Networks window.
Verifying WebUI and LEDs
After setting up the Dell PowerConnect W-Series Instant Access Point and adding a
network, you can use the WebUI and the LEDs to verify the operating status of the
Dell PowerConnect W-Series Instant Access Point.
Using the WebUI—Verify the newly created network is displayed in the Networks
window, as shown in Figure 7.
Figure 7
Verify the newly added wireless network
11. Disconnect client from the instant provisioning network.
12. Connect client to the network you created, as described in step 2.
13. Login to the Dell PowerConnect W-Instant Access Point WebUI, as in step 3.
The instant provisioning network is automatically deleted and should no longer be
present.
Note: Dell recommends that you change the administrator login password. Refer
to the Dell PowerConnect W-Series Instant Access Point User Guide in the
section titled Management Authentication Settings.
Using LEDs—Use the LEDs to verify the operating status of the IAP. The LED

functionality is described in the Install Guide included with your Dell
PowerConnect W-Series Instant Access Point in the section titled Verifying Post-
Installation Connectivity.
PWR: Steady Green indicating that power is on and the device is ready.

ENET: Green or Amber (depending on Ethernet link speed).

11A/N: Steady Green or OFF, indicating the state of the 5GHz radio.

11B/G/N: Steady Green, indicating the state of the 2.4GHz radio.

Contacting Support
Web Support
http://www.dell.com
Main Site
https://support.dell.com
Support Site
https://support.dell.com/manuals
Dell Documentation
Copyright
© 2011 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks
®
Aruba Wireless Networks , the registered Aruba the Mobile Edge Company logo, and Aruba Mobility
®
Management System . Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc.
All rights reserved. Specifications in this manual are subject to change without notice.
Originated in the USA. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code
subject to the GNU General Public License (GPL), GNU Lesser General Public License (LGPL), or other Open
Source Licenses. The Open Source code used can be found at this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate
other vendors' VPN client devices constitutes complete acceptance of liability by that individual or corporation for
this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against
it with respect to infringement of copyright on behalf of those vendors.
Dell PowerConnect
W-Series
Instant Access Point
Quick Start Guide
®
,
Dell PowerConnect W-Series Instant Access Point | Quick Start Guide
Part Number 0510939-01 | June 2011