Closing Line; Snmp File - Dell PowerConnect W-IAP175P Reference Manual

The first object of a table is an
information. Each subsequent object (Informative MIB Objects) inherits the OID of the Entry, and contains
information sorted by keywords: Syntax, Access, Status, Description. For details about keywords, see
.
page 13
The OID of the Entry is aiAccessPointEntry is aiAccessPointTable 1, which represents
1.3.6.1.4.1.674.2.3.3.1.2.1.1. The OIDs of the subsequent objects of this table are appended increments of the
Entry OID.
Group
aiStateGroup
Table
aiAccessPointTable
Entry
aiAccessPointEntry OBJECT-TYPE
SEQUENCE {

Closing Line

Following is the closing line—the end of the MIBs file.
END

SNMP File

The snmp.h file lists the OIDs of all MIBs. Following are sections from snmp.h that show the complete OID of
each of the Controller Transport Service (CTS) MIB elements. The list starts from the ancestral parent iso.
The SNMP file with all Dell MIBs is listed in
All Instant MIBs inherit their OIDs from the Dell MIB node. The following rows list the MIBs that precede CTS,
starting from iso.
20 | Using MIBs
Entry
OBJECT-TYPE
SYNTAX SEQUENCE OF AiAccessPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This contains all access points connected to the
virtual controler. This table is empty on AP where
virtual controller is not active"
::= { aiStateGroup 1 }
SYNTAX AiAccessPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" "
INDEX { aiAPMACAddress }
::= { aiAccessPointTable 1 } AiAccessPointEntry ::=
aiAPMACAddress
aiAPName
aiAPIPAddress
aiAPSerialNum
aiAPModel
aiAPModelName
aiAPCPUUtilization
aiAPMemoryFree
aiAPUptime
. The keyword lists the objects of the table that contain device
SEQUENCE
OBJECT IDENTIFIER ::= { aiMIB 2 }
MacAddress,
DisplayString,
IpAddress,
DisplayString,
OBJECT IDENTIFIER,
DisplayString,
Integer32,
Integer32,
TimeTicks
Chapter 4, "SNMP MIBs Reference" on page 39
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | MIB Reference Guide
"MIBs" on
.