FujiFilm FinePix A600 Owner's Manual page 113

Z Connecting
Matters Problems
There is no image
or sound on the
TV.
Connecting to TV
The TV image is
black and white.
PC does not
Connecting to PC recognize the
camera.
Connecting to Cannot print with
printer PictBridge.
Possible causes
The camera is not connected to the TV
correctly.
The included A/V cable was connected
during movie playback.
"TV" is selected as the TV input.
The video output setting is incorrect.
The TV volume is turned down.
The video output setting is incorrect.
The USB cable (mini-B) is not correctly
connected to the PC or camera.
< PICTBRIDGE is selected in
L USB MODE in the SET-UP menu.
@ DSC is selected in L USB MODE
in the SET-UP menu.
Solutions
Connect the camera and TV correctly.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to "VIDEO".
Change the setting to NTSC or PAL.
Adjust the volume.
Change the setting to NTSC or PAL.
Set up the camera, and connect the USB
cable (mini-B) correctly.
Perform the below steps to cancel the
setting before selecting @ DSC.
• Windows
A The "New Hardware Found" wizard or
"Scanner and Camera" wizard appears.
If the wizard does not appear, proceed
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the PC.
• Macintosh
A The window for locating the driver appears.
If the window does not appear, proceed
to step C.
B Click the [Cancel] button.
C Disconnect the camera from the Macintosh.
Select < PICTBRIDGE.
Page
77
67, 77
77
69, 71
77
69, 71
89
89
78
113