FujiFilm FinePix 6900 Zoom Owner's Manual page 126

Specifications
G
Flash: Auto flash using flash control sensor
Effective range: Wide Approx. 0.3 m – 3.6 m (1 ft. – 11.8 ft.)
Tele Approx. 0.9 m – 3.2 m (3 ft. – 10.5 ft.)
Flash modes : Auto, Red-Eye Reduction,
Forced Flash, Slow Synchro,
Red-Eye Reduction + Slow Synchro
G
LCD monitor
2-inch, low-temperature polysilicon TFT 130,000 pixels
G
Video output
NTSC (US/Canada model) / PAL (Europe model)
G
Self-Timer: 2 sec. / 10 sec. timer clock
In p ut / Out p ut Terminals
G
Video Output: Stereo mini- jack (1)
G
Digital (USB) terminal
For file transfer with a personal computer
G
DC Input: Socket for specified AC power adapter
G
Accessory shoe: Hot shoe
Power Su pp l y and Others
G
Power supply
Use one of the following
• Rechargeable Battery NP-80 or AC Power Adapter
AC-5VS/AC-5VH
G
Number of available shots using the battery (when
fully charged)
Battery Type
Using LCD monitor
NP-80
126 Using LCD viewfinder
No. of Shots Auto Play
Approx. 100 Approx. 1h
Approx. 120 Approx. 1h
The number of shots shown here is an approximate guide to
the number of consecutive shots that can be taken based on
50% flash usage at normal temperatures. However, the actual
number of available shots will vary depending on the ambient
temperature when the camera is used and the amount of
charge in the battery. The number of available shots or
available shooting time will be lower in cold conditions.
G
Conditions for use
Temperature: 0°C to + 40°C ( + 32°F to + 104°F)
80% humidity or less (no condensation)
G
Camera dimensions (W/H/D)
✕ ✕
110 mm 78.5 mm 93.5 mm / 4.3 in.
(not including accessories and attachments)
G
Camera mass (weight): Approx. 410g / 14.5oz.
(not including accessories, batteries or SmartMedia)
G
Weight for photography: Approx. 450g / 18.9oz.
(including batteries and SmartMedia)
G
Accessories: See P.7
G Optional Accessories: See P.108 – 111
✽ These specifications are subject to change without notice.
FUJIFILM shall not be held liable for damages resulting
from errors in this Owner's Manual.
✽ The LCD monitor on your digital camera is manufactured
using advanced high-precision technology. Even so, small
bright points and anomalous colors (particularly around
text) may appear on the monitor. These are normal display
characteristics and do not indicate a fault with the monitor.
This phenomenon will not appear on the recorded image.
✽ The operation error may be caused in a digital camera
by the strong radio interference (i. e. electric fields, static
electricity, line noise, etc.).
✕ ✕
3.1 in. 3.7 in.