Table of Contents
Advertisement
LaCie Bigger Disk Extreme with Triple Interface
User's Manual
3.3.2. USB
Technically, you can connect up to 127 individual USB peripherals at one
time. However, you probably will not use more than 6 to 8 peripherals on
your USB system. Many computers only have two USB ports, so you would
need a hub to connect more than two peripheral drives. The hub regenerates the
signals, generally providing between 4 to 7 connections. To add even more drives,
connect a new hub to a connector of the original hub, creating a new series of
peripherals, etc. But the hub slows down the transfer rate by lengthening the path of the signal. To optimize performance,
connect your drive directly to one of the built-in ports in your computer.
Important Info:
To achieve Hi-Speed USB 2.0 data transfer speeds, a Hi-Speed USB 2.0-equipped device must
be connected to a Hi-Speed USB 2.0 port or hub. If a Hi-Speed USB 2.0-equipped device is connected to a USB
1.1 port or hub, all speeds will revert to USB 1.1 data transfer rates.
For the best performance, connect your Hi-Speed USB 2.0-equipped device directly to a Hi-Speed USB 2.0 port
on your computer, and avoid connecting USB 1.1 devices to the same port, as they may slow all speeds to the
USB 1.1 transfer rates.
LaCie Bigger Disk Extreme with
Triple Interace - USB Connectivity
Options
Hi-Speed USB 2.0 port
or
Hi-Speed USB 2.0 hub
480M/bps
USB 1.1 port
12M/bps
or
USB 1.1 hub
3. Installing Your LaCie Drive
Tech Note:
USB and improving performance,
please see sections:
•
•
•
or
or
For more information about
2.3.2. USB Cables And Connectors
5.3. Optimizing Data Transfers
7. USB Questions & Answers
480M/bps
or
12M/bps
or
page 33
Advertisement
Table of Contents
