Do you have a question about the RL-330 and is the answer not in the manual?
Questions and answers
John Slaughter
January 22, 2025
when adjusting the right looper that has come lose, should it pass behind the needle or in front when in motion?
1 comments:
Mr. Anderson
February 10, 2025
The right looper of the Riccar RL-330 should pass behind the needle when adjusting it. This ensures proper stitch formation and threading alignment. If the looper passes in front of the needle, it may cause skipped stitches or thread breakage. Always follow the machine's threading diagram and adjustment instructions to ensure correct positioning.
Need help?
Do you have a question about the RL-330 and is the answer not in the manual?
Questions and answers
when adjusting the right looper that has come lose, should it pass behind the needle or in front when in motion?
The right looper of the Riccar RL-330 should pass behind the needle when adjusting it. This ensures proper stitch formation and threading alignment. If the looper passes in front of the needle, it may cause skipped stitches or thread breakage. Always follow the machine's threading diagram and adjustment instructions to ensure correct positioning.
This answer is automatically generated