Touch Screen Operations; Touch Screen Calibrate - Power Acoustik PTID-7002NR Owner's Manual

TOUCH SCREEN OPERATIONS

TOUCH SCREEN CALIBRATION
When "Power Off", press the buttons 2, [BAND] of remote control to enter the
CALIBRATION page:
To touch the points from 1 to 5 until the points change to next cross by using a ballpoint
pen or pencil. After all 5 points have been touched, the unit has been finished the
CALIBRATION. If the calibration is succeeded, the unit would display the following
page and then power off automatically.
If the calibration is failed, the unit would display the following page and please operate
the above processes again.
- 19 -