Using The Remote Control; Inserting Batteries - Power Acoustik PADVD-190 Owner's Manual

Using the Remote Control

When operating the remote control, point it at
the remote control sensor as shown on the
diagram.
The remote control can be used from a direct
distance of approximately 4~5 meters.
The remote control can be operated at a
horizontal angle of up to 25 degree with
respect to the remote control sensor.
Notes
Improper use of batteries may cause battery leakage and corrosion.
Do not insert the batteries into the remote control in the wrong direction.
If you do not use the remote control for a long period of time, remove the batteries to avoid possible
damage from battery corrosion.
If the remote control does not function correctly or if the operating range becomes reduced, replace all
batteries with new ones.
If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new
batteries.
Do not drop or give the remote control a shock.
Do not leave the remote control near extremely hot or humid place.
Do not spill water or put anything wet on the remote control.
INTRODUCTION
Within 4~5m
POWER Open/Close
SETUP NTSL/PAL
FUNCTION
1 2 3
ANGLE
4 5 6
AUDIO
7 8 9
SUBTITLE
0 CLEAR
PROGRAM
- KEY + - VOL +
PAUSE SEARCH
ENTER
PLAY STOP
MENU TITLE SLOW STEP
L/R/ST MUTE ZOOM DISPLAY
PBC RETURN A-B REPEAT
-7-

Inserting Batteries

1 Open the battery cover.
2 Insert batteries(AAA size).
Make sure to match the + and - on the
batteries to the marks inside the battery
compartment.
3 Close the cover.
1 2 3