Page 1
DOD# 424 • Available in 2 standard faceplate finishes: • PNL-VCAM-2 faceplates: • Vandal Resistant Features: VCAM-1 / VCAM-1-IR: 0.23 kg (0.5 lbs) VCAM-2: 0.36 kg (0.8 lbs) -40°C to 85°C (-40°F to 185°F) (3) gel-filled butt connectors (3M Scotchlok UR2) •...
Page 2
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666 RETURNING PRODUCT FOR REPAIR RETURNING PRODUCT FOR EXCHANGE The following procedure is for equipment that needs repair: The following procedure is for equipment that has failed out-of-box (within 10 days of purchase): Viking Electronics, 1531 Industrial Street, Hudson, WI 54016 4.
Page 3
A Viking model can be used to surface mount a to a wall or post. Recommended mounting height to bottom of is 50” - 54”. Drill a small wire exit hole in wall. Pull wire through and seal hole around wire with putty or caulking.
Page 4
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.