Connecting To A Tv (Video) (Good Quality) - Samsung BD-P2550 User Manual

connections

CONNECTING TO A TV (VIDEO) (GOOD QUALITY)

1. Using video/audio cables, connect the VIDEO (yellow) / AUDIO (red and white) OUT terminals on the rear of
the Blu-ray Disc Player to the VIDEO (yellow) / AUDIO (red and white) IN terminals of your TV.
2. Turn on the Blu-ray Disc Player and TV.
3. Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears on
the TV screen.
•
If you have set the remote control to operate your TV (see pages 18~19), press the TV INPUT SEL. button on
the remote control and select VIDEO as the external source of the TV.
1 A
M

Noise may be generated if the audio cable is placed too close to the power cable.

If you want to connect to an Amplifi er, please refer to the Amplifi er connection pages. (See pages 25~28)

The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of
your TV.

If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
Blu-ray Disc Player.

The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.
(See page 41)
24_ connections
Red White Yellow