Specifications - Behringer EURORACK UB1002FX Technical Specifications

2
EURORACK UB1002FX Technical Specifications
EURORACK UB1002
Ultra-Low Noise Design 10-Input 2-Bus Mic/Line Mixer
with Premium Mic Preamplifiers and Multi-FX Processor
Ultra-low noise design, highest possible headroom, ultra-transparent audio
2 state-of-the-art, studio-grade IMP "Invisible" Mic Preamps with 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
Integrated digital stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
Effective, ultra-musical 3-band EQ plus switchable low-cut filter on all mono channels
Clip LEDs on all mono channels
10 balanced high-headroom line inputs with +4/-10 level selection on all stereo channels
FX send control per channel for internal FX processor and/or as external send
Main mix outputs plus separate control room, headphone and 2-track outputs
2-track inputs assignable to main mix or control room/headphone outputs
Switchable +48 V phantom power for condenser microphones
External power supply for noise-free audio and superior transient response
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

Specifications

Microphone inputs (IMP Invisible Mic Preamp)
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance
@ 50 Ω source resistance
@ 150 Ω source resistance
Frequency response
Gain range
Max. input level
Impedance
Signal-to-noise ratio
Distortion (THD+N)
XLR, electronically balanced,
discrete input circuit
-132.7 dB / 137 dB A-weighted
-130 dB / 133.9 dB A-weighted
-127.1 dB / 130.9 dB A-weighted
<10 Hz - 200 kHz (-1 dB)
+10 to +60 dB
+12 dBu @ +10 dB gain
approx. 2.6 kΩ balanced
-107 dB / -111 dB A-weighted
(0 dBu In @ +22 dB gain)
0.005% / 0.003% A-weighted
Line Input
Type
Impedance
Gain range
Max. input level
Fade-out attenuation (Crosstalk attenuation)
1
Main fader closed
Channel fader closed
Frequency Response
Microphone Input to Main Out
<10 Hz - 80 kHz
<10 Hz - 137 kHz
1/4" TRS connector
electronically balanced
approx. 20 kΩ balanced
10 kΩ unbalanced
-10 to +40 dB
+20 dBu @ 0 dB Gain
85 dB
88 dB
+0 dB / -1 dB
+0 dB / -3 dB