Channel Banks Setup Troubleshooting - LG 26LG3DCH-UA Setup Manual

Channel Banks Setup Troubleshooting

Problem
Cannot change channel status in menu.
Channel Preview menu does not appear.
Channel is blanked in all channel banks.
Cannot tune in deleted channel
on Ch Preview menu.
'Inactive TV' message appears
and then TV turns off.
Channel found in scan does not tune in
with Channel Up/Down.
If 'Bank' on Installer remote is pressed,
TV shows Aux sources selection menu.
P A G E 4 8
CHANNEL PREVIEW - BANK 1
CH 011-001 NORMAL-ADDED
Enter -> Change
CC ->VCHIP Menu Ch. Preview -> Exit
Channel Banks Setup Menu
Solution
Installer menu item 028 Ch Overide is set to 000.
Set Ch Overide to 001 to allow access for channel status change.
2-5-5+ Menu procedure was not performed.
Channel Banks setup menu will not be available until 2-5-5+ Menu procedure is done.
And, item 028 Ch Overide is set to 001 to allow access for channel status changes.
Blanking a channel in one channel bank will make it blank in all channel banks.
Select a channel bank where the deleted channel number is set to 'Normal Added' .
Direct enter the deleted channel number. Change to the bank you want to activate the
channel in. Select 'Normal Added' on the Ch Preview Channel Banks menu.
TV is set up to display 'Inactive TV' message if all channels are 'Normal Delete' from
Channel Bank 4. Select another channel bank (Bank 1, 2 or 3) which will return TV to
normal operation.
Channel was deleted in currently selected channel bank. If banks were set up, premium
channels may only be available on another channel bank.
Select the channel bank where the channel is set to 'Normal Added' . Or, direct enter
channel number then go to banks menu and select 'Normal Added' .
Item 027 Hospital Mode in Installer menu is set to 0. Set back to default '2' for
Channel Banks to appear with Bank or Source key presses.
206-4071