Using the Option Menu
1
Complete Steps 1 to 3 of Using the WISELINK Menu.
(Refer to page 33)
Press the ◄ or ► button to move to Photo, then press the
ENTER button.
The saved file information is displayed as a folder or file.
Press the ▲, ▼, ◄ and ► button to select a file, then
press the ENTER button. Pressing the button over a photo
thumbnail displays the photo in full screen.
4
Press the INFO button to display the option (Start Slide
Show, Zoom, Rotate, List)
Zoom:
Press the ▲ or ▼ button to select Zoom, then press the
ENTER button.
Each time the ▲ or ▼ button is pressed, the photo size
increases.(X1 → X → X4 )
- X1 : Restore a photo to its original size.
- X : Zoom-in to a photo x2.
- X4 : Zoom-in to a photo x4.
To pan up/down/left/right in the zoomed-in photo, press the
INFO button to remove option menu, then press the ▲, ▼, ◄
and ► buttons.
➢
The Rotate, Start Slide Show option is disabled when the Zoom option is selected.
Rotate:
Press the ▲ or ▼ button to select Rotate, then press the
ENTER button.
Each time the ▲ or ▼ button is pressed, the photo rotates
repeatedly.
- 0º : This rotates a photo to its original position
- 0º : This rotates a photo by 90 degrees
- 10º : This rotates a photo by 180 degrees
- 0º : This rotates a photo by 270 degrees
➢
The rotated file is not saved.
➢
The Zoom, Start Slide Show option is disabled when the Rotate option is selected.
English -
Start Slide Show
Start Slide Show
Zoom
Zoom
X1
X1
Rotate
Rotate
0º
0º
List
List
Exit
Exit
Start Slide Show
Zoom
X1
X1
Rotate
0º
X2
X4
List
Exit
0º
Start Slide Show
Zoom
X1
Rotate
0º
0º
90º
List
180º
Exit
270º