JBL ON STAGE 400ID User Manual page 7

TroUbleSHooTing
chArGiNG AND SYNciNG
symptom possible problem
iPod will not charge Wrong adapter is used
The iPod is not making full contact with the
docking station
iPod is not recognized by the Third-party accessories may be conflicting
computer when docked into with the USB signal
the JBL On Stage 400ID unit,
or there is an error in data
transfer
USB port is not supplying enough power
solution
Make sure correct adapter is used for your specific
iPod model.
Make sure the iPod is seated securely into the
docking station.
Make sure you do not have the JBL On Stage 400ID
unit connected to a USB hub; connect the unit
directly into the computer's USB port.
Try connecting the USB cable to another port on the
back of the computer.
note
www.jbl.com 7