Table of Contents
Advertisement
Taking photos with the still camera
There are three ways to take photos with the still camera. You can press the camera
key, tap the on-screen camera button, or touch a spot on the screen.
To open the camera
•
When the screen is active, press and hold down the camera key.
To close the camera
•
Press
from the main camera screen.
To take a photo using the camera key
1
Activate the camera.
2
If the still camera is not selected, drag
3
Press the camera key fully down.
To take a photo by tapping the on-screen button
1
Activate the camera.
2
If the still camera is not selected, drag
3
To display all settings, press
4
Tap Capturing method and select On-screen button if it is not already
selected.
5
Point the camera towards the subject.
6
Tap the on-screen button . The photo is taken as soon as you release your
finger.
To use the zoom function
•
When the camera is open, press the volume key up or down to zoom in or out.
To view your photos and videos
1
Open the camera, then tap a thumbnail at the bottom of the screen to open a
photo or video.
2
Flick left or right to view your photos and videos. Videos are identified by
In step 1, you can also flick the thumbnails from right to left and then select the one you want
to view.
To delete a photo
1
Open the photo you want to delete.
2
Tap .
Adding the geographical position to your photos
Turn on geotagging to add the approximate geographical location (a geotag) to
photos when you take them. The geographical location is determined either by
wireless networks (mobile or Wi-Fi® networks) or GPS technology.
When
appears on the camera screen, geotagging is turned on but the
geographical position has not been found. When
and the geographical location is available, so your photo can get geotagged. When
neither of these two symbols appears, geotagging is turned off.
To turn on geotagging
1
Activate the camera.
2
If the still camera is not selected, drag
3
Press
, then tap Geotagging > On.
4
Tap OK to agree to enable GPS and/or wireless networks.
5
Check the options you want to select under Location services.
6
After you confirm your settings, press
7
If
appears on the camera screen, your location is available and your photo
can get geotagged. If not, check your GPS and/or wireless network
connection.
This is an Internet version of this publication. © Print only for private use.
to
.
to
.
.
appears, geotagging is turned on
to
.
to return to the camera screen.
69
.
Advertisement
Table of Contents
